Need accessories to go with your 3d printer? Check our Top 6 Essential 3D Printer Accessories.
Products of the ‘PPprint Printing-Kit for Raise3D Pro2/Pro3 Series’:
P-surface 141 (304mm x 304mm)
P-adhesive 220 (304mm x 304mm)
P-roller 621
P-wipe 515
P-cleaner 298
P-cutter
The ‘PPprint Printing-Kit for Raise3D Pro2/Pro3 Series’ enables simple, high quality and reporoducible 3D printing of polypropylene (PP) on the Raise3D Pro2 series. The printing kit consists of the 3d printing bed ‘P-surface 141‘ (304mm x 304mm), the adhesive film ‘P-adhesive 220’ (304mm x 304mm), the ‘P-roller 621’ for applying the 3d printing bed, the P-cutter, as well as the ‘P-wipe 515’ and the ‘P-cleaner 298’ for cleaning and maintenance of the ‘P-surface 141’.
P-filament 721 print profile for Raise3D Pro2/Pro3 Series
Cleaning and maintenance of the ‘P-surface 141‘: Before first use, wash out the ‘P-wipe 515’ thoroughly with lukewarm water. Shake ‘P-cleaner 298’ thoroughly before use. To clean the ‘P-surface 141’, apply enough of the ‘P-cleaner 298’ to evenly cover the entire surface when spread with a paper towel. After a short exposure time (approx. 1 minute), the ‘P-cleaner 298’ can be completely removed with a paper towel. Finally, the ‘P-surface 141’ should be wiped off with the moistened ‘P-wipe 515’. After use, rinse the ‘P-wipe 515’ in clear water, wring it out carefully and then pull it into shape. Do not dry the ‘P-wipe 515’ in the sun or on radiators.
Security alert:
DANGER: May be fatal if swallowed or if inhaled. Causes skin irritation. Causes severe eye irritation. Keep out of the reach of children. Wear protective gloves/eye protection IF INGESTIONS: Immediately call TOXIC INFORMATION CENTER/Medical Doctor/First Aid. IF ON SKIN TOUCH: Wash with plenty of soap/water. DO NOT induce vomiting. IF IN CONTACT WITH EYES: Rinse gently with water for several minutes. Remove any contact lenses if possible. Continue rinsing. If eye irritation persists, seek medical advice/attention. Dispose of the contents/container in accordance with local regulations. Contains: Hydrocarbons (C11-C14), n-alkanes, isoalkanes, cyclics, <2% aromatics, butyl glycol, amides, coco, N,N-bis(hydroxyethyl).
Free UPS ground shipping within continental United States.
For delivery of the USA, expedited delivery availability (additional cost may apply), or additional questions, please contact sales@raise3d.com or 1-888-963-9028.
The shown price excludes tax, which will be calculated during check out.
