Improvements
1. Functions Improvement
1) FFF printer: optimized for unstable filling shapes of gap fill and can reduce printing time (the more gap fill a model has, the more time is reduced).
Old version:
New version:
2) FFF printer: gap fill merges multiple consecutive short commands to improve the printing surface effect and reduce the actual printing time.
3) FFF printer: add new slicing options: ‘Narrow Solid Fill Flowrate’ and ‘Narrow Top Surface Solid Fill Flowrate’ to control the concentric filling flow rate of narrow areas. Improved the print quality problem of the outer surface caused by excessive flow rate when using concentric filling in narrow areas.
- Parameter option location:
4) Improve the translation of some Raft part for FFF slicing settings.
2. Functions Improvement
DLP:
1) Add Official Resins
○ [Raise3D] Draft Grey V1
○ [Raise3D] ESD Black V1
2) Add Third-Party Resins
○ [Forward AM Ultracur3D] EL60
○ [Forward AM Ultracur3D] EL4000
○ [Henkel LOCTITE] 3D 3843 Black
○ [Henkel LOCTITE] 3D PRO417 Black
○ [Henkel LOCTITE] 3D PRO410 Black
3) Official Resins Price Adjustment: [Raise3D] Standard Black V1、[Raise3D] Standard White V1.
FFF:
1) Updated the slicing templates of ASA, PC, and TPU-95A of the Pro3 HS series official printer, mainly to improve the printing quality of thin-wall features on the model.
3. Bug Fixes
1) Fixed the issue that support cannot be generated normally when Support Infill Ratio is 0% and Support Infill Outlines > 0.
2) Fixed the issue that the LAN printer cannot be connected after enabling the system global proxy.