+1 888 963 9028

High Clear Resin

Highly transparent and easy-to-use resin

High Clear resin is an easy-to-print and transparent resin that can be used to manufacture highly transparent components. After printing, the model presents a semi-transparent state with slightly blue. After appropriate post-processing such as sanding, polishing, and varnishing, it can achieve higher transparency and is suitable for shell components, prototype design, optical parts, fluid tubes, and other application scenarios.

Raise3D High Clear Resin 1kg

Order Now

Benefits

 

  • High success rate
  • High precision
  • Clear presentation of details
  • Different degrees of transparency for flexible use

Applications

 

  • Transparent prototype production, such as optical device housing, display models, etc.
  • Liquid flow analysis, internal flow channels, etc.
  • Precision components manufacturing, transparent protective covers, small mechanical components, and complex assembly parts.
  • Prototype development of consumer goods, the fields of consumer electronics or household items, etc.

Material Properties*

*All test specimens were printed with Raise3D DF2 printer (100 μm thickness, 5.5s) and cured with DF Cure for 5 minutes per side at room temperature.
See more details in Technical Data Sheet.

Testing Method Green Post-Cured
Tensile Strength ASTM D638 28 MPa 44 MPa
Young’s Modulus ASTM D638 1410 MPa 2092 MPa
Elongation at Break ASTM D638 31% 14.5%
Flexural Strength ASTM D790 34 MPa 72 MPa
Flexural Modulus ASTM D790 733 MPa 1798 MPa
Notched Izod ASTM D256 48 J/m 49 J/m
Heat Deflection Temp.@0.45 MPa ASTM D648 N/A 51.6°C

 

Printing Settings

  1. Before printing, it can be left for a period of time, waiting for the elimination of air bubbles, otherwise it will affect the visual effect and clarity of the final prints.
  2. It is recommended to use the default printing profiles available in ideaMaker.
  3. After printing, it’s recommended to not leave a successful but unwashed model in the printer for too long. This will prevent the model from over-swelling, which may cause dimensional deviations or support softening.
  4. For more printing information, please read Raise3D DF2 3D Printer User Manual.

Cleaning

High Clear V1 Resin requires cleaning to achieve the ideal properties of the printed part.

There is no need to remove support structures from the printed part, and the part should then be washed before post-curing, until the surface is free of any solvent residue.

For special structures or fine details, such as small holes, it’s recommended to clean manually, then blow dry the part with compressed air/nitrogen to remove residual solvent from the surface, or leave the part for a short time at room temperature to dry. Post-cure the model until the surface is free of any solvent residue.

Please refer to the chart on the right for the recommended washing parameters with Raise3D DF Wash.

Wash Time Wash Drying Time
Recommended washing parameters 5 min 10 min

 

Post-curing

After cleaning, High Clear V1 parts require post-curing to achieve optimal properties. Please refer to the chart on the right for the parameters with Raise3D DF Cure.

Setting 1: For prototyping or display purpose (default parameters in ideaMaker).

UV Curing Time Heat Curing Time Heat Curing Temperature
Setting 1 10 min 0 min N/A

 

Download Product Documents

High Clear Resin

Learn more about Raise3D resins

Learn More