PA12 CF+
A filament for end-use and functional applications
Raise3D Industrial PA12 CF+ is a carbon fiber-reinforced composite filament based on Polyamide 6, 12 (PA6, 12; Nylon 6,12). PA6,12 inherits the best characteristics of both PA6 and PA12, such as toughness and reduced water absorption. By adding 15 wt.% short carbon fibers with optimized length distribution, mechanical, thermal properties and even surface quality of printed parts are all enhanced.
Compared with Raise3D Industrial PA12 CF, it exhibits higher strength-to-weight ratio, better interlayer bonding quality (Z-direction strength) and better dimensional stability. After annealing, thermal and mechanical properties are improved further. PA12 CF+ is an optimal choice for lightweight and strong end-use applications, such as jigs, fixtures, and many other functional parts in the fields of manufacturing, automotive, and aerospace.
- Superior interlayer bonding strength
- Stiff and strong
- High strength-to-weight ratio
- Lower shrinkage ratio
- Heat and wear resistant
- Chemical resistant
Compatibility
Printer: Raise3D E2CF/ Raise3D RMF500
Filament: Raise3D Industrial PA12 CF Support Filament/ Raise3D Premium PVA+ Filament
Please note, carbon fiber reinforced filament is abrasive and can wear out brass nozzles quickly. It is suggested to print carbon fiber filament with hardened nozzle.
Raise3D Industrial PA12 CF+ Filament
