+1 888 963 9028

Draft Grey Resin

Fast, rigid and easy-to-use resin

Draft Grey resin is a photosensitive resin product that can achieve rapid printing and easy post-processing, providing an ideal choice for users needing to print the prototype model quickly. It can meet the needs of markets such as industry and education. It can be used to print initial models, rapid product design iterations, high-yield parts, 3D Print demonstration parts, medical teaching, anatomical models, teaching tool models, art sculpture, and other art display parts, etc.

Raise3D Draft Grey Resin 1kg

Order Now

Benefits

 

  • Fast printing speed
  • High printing success rate
  • Low viscosity
  • Smooth surface
  • Easy to clean

Applications

 

  • Rapid prototypes validation
  • High throughout parts
  • Industrial design parts
  • Art and sculpture display parts, etc

Material Properties*

*All test samples are printed on Raise3D DF2 printer (405nm wavelength, 2.3mW/cm², 200 μm layer thickness, exposure time 5 seconds) and cured for 10 minutes on the front and back of the sample with DF Cure.
See more details in Technical Data Sheet.

Testing Method Green Post-Cured
Tensile Strength ASTM D638 27.7 MPa 56.5 MPa
Young’s Modulus ASTM D638 0.95 GPa 2.9 GPa
Elongation at Break ASTM D638 16.7% 8.31%
Flexural Strength ASTM D790 61.2 MPa 98.1 MPa
Flexural Modulus ASTM D790 1.67 GPa 3.3 GPa
Notched Izod ASTM D256 18.0 J/m 18.4 J/m
Heat Deflection Temp.@0.45 MPa ASTM D648 49°C 96°C

 

Printing Settings

  1. Gently shake the resin bottle before printing to mix the resin evenly and then import it into the resin tank for printing, otherwise it will affect the appearance effect and material performance of the final printed part.
  2. It is recommended to use the default printing profiles available in ideaMaker.
  3. After printing, it’s recommended to not leave a successful but unwashed model in the printer for too long. This will prevent the model from over-swelling, which may cause dimensional deviations or support softening.
  4. For more printing information, please read Raise3D DF2 3D Printer User Manual.

Cleaning

Draft Grey Resin requires cleaning to achieve the ideal properties of the printed part.

There is no need to remove support structures from the printed part, and the part should then be washed before post-curing, until the surface is free of any solvent residue.

For special structures or fine details, such as small holes, it’s recommended to clean manually, then blow dry the part with compressed air/nitrogen to remove residual solvent from the surface, or leave the part for a short time at room temperature to dry. Post-cure the model until the surface is free of any solvent residue.

Please refer to the chart on the right for the recommended washing parameters with Raise3D DF Wash.

Wash Time Wash Drying Time
Recommended washing parameters 5 min 10 min

 

Post-curing

After cleaning, Draft Grey parts require post-curing to achieve optimal properties. Please refer to the chart on the right for the parameters with Raise3D DF Cure.

UV Curing Time Heat Curing Time Heat Curing Temperature
Setting 1 20 min 0 min N/A

 

Download Product Documents

Draft Grey Resin

Learn more about Raise3D resins

Learn More