Standard Black Resin

Easy-to-use resin for prototyping and multiple scenarios

Standard Black Resin is a 3D printing material with excellent performance, strong detail performance, wide application range and cost performance. It is specially developed to meet the needs of high-precision molding and high-quality surface effects. Its superior mechanical properties, stable chemical properties and ease of use make it an ideal choice for DLP 3D printing equipment.

The model printed with Standard Black Resin presents deep and uniform black, with good mechanical strength and durability. Whether it is industrial design, education and scientific research, or artistic creation, it can help users quickly realize their creativity and design needs.

Raise3D Standard Black Resin 1kg

Order Now

Benefits

High precision
Smooth surface
Strong details
Easy to print
Excellent mechanical properties

Applications

Presentation and assembly of prototypes
Micro-feature and complex detail models
Film and artistic props
Jigs and fixtures
Small batch production

Material Properties*

*All test specimens were printed with Raise3D DF2 printer (2.3 mW/cm2 at 405 nm, 50 μm thickness, 3s) and cured with DF Cure for 15 minutes per side at room temperature.
See more details in Technical Data Sheet.

	Testing Method	Green	Post-Cured
Tensile Strength	ASTM D638	20.46 MPa	26.51 MPa
Young’s Modulus	ASTM D638	2098 MPa	2658.97 MPa
Elongation at Break	ASTM D638	18.29%	11.63%
Flexural Strength	ASTM D790	49.03 MPa	74.98 MPa
Flexural Modulus	ASTM D790	1767.56 MPa	2518.42 MPa
Notched Izod	ASTM D256	29.53 J/m	43.24 J/m
Heat Deflection Temp.@0.45 MPa	ASTM D648	49.1°C	66.9°C

Printing Settings

Shake or stir well before printing;
Avoid light storage, prevent ultraviolet radiation;
Make sure that the resin used for printing is sufficient;
The residue generated in the printing process needs to be filtered;
Avoid skin contact and wear protective gloves.
For more printing information, please read Raise3D DF2 3D Printer User Manual.

Cleaning

The Standard Black Resin needs to be cleaned to obtain the desired surface effect. There is no need to remove the support structure from the print before cleaning, the print should be cleaned before post-curing until the surface is free of any solvent residue. For special structures or detailed parts, such as small holes, it is recommended to clean them manually, and then use compressed air or nitrogen to dry the residual solvent on the surface, or place the printed parts at room temperature for a short time to dry until there is no solvent residue on the surface before post-curing.

* Refer to the table to the right for recommend cleaning parameters for Raise3D DF Wash.

	Wash Time	Wash Drying Time
Recommended washing parameters	5 min	10 min

Post-curing

After cleaning, general purpose black resin parts need to be post-cured to achieve optimal performance. Refer to Raise3D DF Cure Post-Cure Parameters in the table to the right.

	UV Curing Time	Heat Curing Time	Heat Curing Temperature
Setting 1	30 min	30 min	60°C

Download Product Documents

TDS
SDS
RoHS
TSCA
VoCs
SVHC